Machining Spindles
at Röders

 
roe_hauptspindel.jpg

For a high efficiency of the machine in the user-specific application the spindle choice is essential. Therefore, Röders offers an exceptionally wide range of main spindles. By means of a standardized interface, which has been optimized over many years, especially thermally, the main spindles are mounted in the Z-axis of the machines. This allows for a cost-effective change to another spindle type at a later time, in case the application for the machine changes. Options like vector control, axis cooling for high precision, lead throughs etc. are available as needed.
Röders always has spare spindles in stock for all spindle types.

In case an application requires very high rpm and also a relatively powerful spindle, Röders offers the possibility to equip a machine with two main spindles. Further information can be found at: Double Spindle Machine – Option Z2.

 
Tool Holder Max. rpm Torque Bearings / Lubrication
HSK E25 90,000 0.6 Nm S1 air bearings
HSK E25 60,000 0.6 Nm S1 air bearings
HSK E25 50,000 0.9 Nm S1 ball bearings / grease
HSK E32 60,000 3.4 Nm S1 ball bearings / air-oil
HSK E32 40,000 2.4 Nm S1 ball bearings / grease
HSK E40 45,000 5.5 Nm S1 ball bearings / axis cooling / air-oil
HSK E40 42,000 5.9 Nm S1 ball bearings / air-oil
HSK E50 36,000 12.4 Nm S1 ball bearings / axis cooling / air-oil
HSK E50 36,000 12.4 Nm S1 ball bearings / air-oil
HSK F63/E50 30,000 21.0 Nm S1 ball bearings / air-oil
HSK A63 30,000 35.0 Nm S1 ball bearings / air-oil
HSK A63 24,000 67.0 Nm S1 ball bearings / air-oil
HSK A63 22,000 101.0 Nm S1 ball bearings / air-oil
©2017 Röders GmbH